Using Power Core Word Clock To Sync Legacy Digital Audio Devices

Legacy digital audio equipment can remain valuable in a radio studio, outside-broadcast rack or production suite, but it needs a dependable timing reference. A converter, recorder or digital effects unit may pass audio correctly only when its sample clock agrees with the rest of the system. Power Core’s word clock output can provide that reference, allowing older devices to operate within a modern, networked Lawo workflow.

The process is straightforward when the clock hierarchy, cabling and device settings are planned together. It becomes less reliable when a BNC cable is treated as an ordinary audio lead, when several devices compete to become master, or when an older unit is left at 44.1 kHz while the facility operates at 48 kHz.

Establish The Clock Hierarchy

Choose one master clock for the relevant audio system. In a Power Core-based installation, Power Core can act as the timing source for compatible legacy equipment, while the connected converters, digital recorders and processors follow it as slaves. Each device should be set to external word clock rather than internal clock, provided its input supports the required format.

Check the operating sample rate before connecting anything. Australian radio facilities commonly use 48 kHz for broadcast production, playout and studio links, whereas some music-production hardware defaults to 44.1 kHz. A mismatch can produce clicks, distorted audio, intermittent lock or a complete loss of signal, even when the routing itself is correct.

Power Core’s role should also be considered alongside the wider Lawo environment. Networked audio, control surfaces and software applications may have their own synchronisation requirements, so the word clock arrangement should match the facility’s overall signal-flow documentation rather than being added as an isolated fix.

Use Correct Word Clock Cabling

Word clock normally travels over 75-ohm coaxial cable with BNC connectors. Standard video cable is often suitable when it has the correct impedance, while ordinary 50-ohm test cable or improvised adapters can cause reflections and unreliable locking. Keep the cable run tidy, avoid unnecessary joins and label both ends during installation.

Termination matters. A point-to-point connection should generally be terminated at the receiving device if that input provides a selectable 75-ohm termination. For several legacy units, use an appropriate word clock distribution amplifier or a purpose-designed output arrangement rather than creating a long chain of clock inputs. Daisy-chaining can work in limited cases, but every extra connection increases the chance of impedance and signal-level problems.

In a Sydney or Melbourne studio with equipment racks spread between control rooms and machine rooms, cable length and cable pathways deserve practical attention. Keep clock cabling away from poorly screened power supplies and allow for service access behind racks. A neat installation makes it easier to identify whether a fault comes from the source, cable, termination or receiving device.

Configure Legacy Equipment Carefully

On each older digital unit, select the external word clock input and confirm that the displayed sample rate matches Power Core. Some equipment has a dedicated clock-source menu; other devices select external synchronisation automatically when a valid signal appears. Save the configuration if the device has presets, but verify the setting again after a power cycle.

Not every digital device accepts word clock. AES3, S/PDIF, ADAT and MADI connections carry embedded timing, but that does not guarantee a separate BNC input. A unit without a word clock input may need to remain clocked from its digital source, or it may require a converter or distribution solution that supports its particular interface. Check the manufacturer’s manual before assuming that a BNC socket is a compatible clock input.

When replacing or repairing old hardware, component availability can affect the project as much as signal design. A resource such as silicon component research may help technicians investigate obsolete parts, although any repair work should still follow the equipment manufacturer’s service documentation and appropriate electrical procedures.

Verify Lock Before Going Live

After wiring, power up Power Core and allow the legacy devices to lock. Look for a stable external-clock indicator rather than relying only on audio passing through. Listen for clicks during silence, monitor the device’s status page and check that the receiving unit does not repeatedly alternate between internal and external timing.

A useful test includes a sustained tone, speech and silence. Record or monitor the result through the complete chain, including the return path to the console or playout system. If clicks appear at regular intervals, begin by checking the selected clock source, sample rate and termination. If the signal disappears entirely, confirm that the legacy device accepts the word clock level and format being supplied.

Timing is especially important when several microphones or digital paths are combined. In a production environment handling orchestral sessions, phase stability and predictable conversion support clean balances; Lawo’s discussion of a classical recording workflow illustrates why timing discipline matters when multiple sources are managed together.

Plan For Australian Studio Operations

Australian broadcasters often work across metropolitan hubs, regional stations and remote contribution sites. A clocking method that is dependable in a permanent Brisbane or Perth facility may need extra documentation when equipment is transported for an outside broadcast or maintained by a technician in a regional centre. Record the master device, sample rate, cable destinations and termination points in the rack documentation.

Local procurement also affects installation choices. Equipment used in Australia should be sourced and installed with applicable electrical safety and RCM compliance requirements in mind, while radio operations must continue to meet the relevant ACMA licence and technical obligations. Those requirements do not replace audio-clock testing, but they shape how equipment is selected, powered and maintained.

Allow for everyday operational habits as well. A producer may reboot a recorder before a session, a volunteer at a community station may change a device preset, or a visiting engineer may connect a familiar converter without checking its clock source. Clear labels such as “External Word Clock—48 kHz” and a short startup checklist reduce the likelihood of a silent timing change.

Power Core can give legacy digital audio devices a stable place within a current broadcast system, provided the installation treats word clock as a timing network rather than an ordinary patch lead. Set one master, use suitable 75-ohm cabling, terminate the endpoints correctly, configure every slave and test the complete audio path before transmission or recording. The practical takeaway is simple: document the clock source and sample rate beside the rack, then verify lock whenever equipment is moved, replaced or reset.

A wide modern broadcast studio with warm amber and charcoal tones, sleek audio mixing console glowing softly under dim lighting, calm and professional atmosphere